• Category: Industry News
• Author:
• Source:
• Release time:2023-02-04 21:15
• Views

【Summary】 In industrial production, efficiency and speed are the key factors determining production efficiency. There are obvious differences in efficiency between the two mounting methods of Suel HA series core insert and screw lock. The following will be a detailed comparison from several aspects. 1、Installation time Suel HA series core In-line mode With an innovative in-line design, installation time is greatly reduced.Compared to the traditional Screw locking method，The direct insertion method reduces the time for fastening screws one by one and improves installation efficiency. In actual production, this difference will be more obvious with the expansion of the scale, and the direct insertion method can complete the installation of a large number of core parts in a short time. 2、Manpower cost The screw locking method requires manual fastening of screws one by one, which consumes a lot of manpower. The Suel HA series core insertion method reduces this cumbersome operation and reduces the skill requirements for workers. In today's rising labor costs, the direct insertion method can effectively reduce production costs and improve the competitiveness of enterprises. 3、reliability Although the screw locking method has a high fastening force in some cases, its reliability has certain problems. Due to the influence of human operation, screw locking may cause uneven tightening, resulting in uneven force on the core and increasing the risk of damage. The SuelHA series of in-line core inserts ensures the stability and reliability of the installation process through an innovative mechanism design, effectively avoiding this situation. 4、Maintenance cost The Suel HA series of in-line core not only provides advantages during installation, but also performs well during later maintenance. Because the use of screws and other parts is reduced, the in-line mode can effectively reduce maintenance costs. Compared with the screw locking method, the in-line method has a longer service life and a lower failure rate, which can save a lot of maintenance costs for enterprises. 5、Sum up Through the comparison of the above aspects, we can clearly see that the efficiency of SuelHA series core insert is better than that of screw locking. The in-line mode has the advantages of short installation time, low labor cost, high reliability and low maintenance cost, which brings significant advantages to enterprises. With the continuous development of industrial production, SuelHA series core insert mode will become the mainstream installation mode in the future industrial production. To sum up, the efficiency difference between SuelHA series core insert and screw lock is obvious. Enterprises should actively adopt innovative direct-plug methods to improve production efficiency, reduce costs and enhance competitiveness, so as to stand out in the fierce market competition.